Last updated: September 2026
1. Acceptance of Terms
By booking, purchasing, or using any service provided by Cubit Joinery, a business operating in the United Arab Emirates, you agree to be bound by these Terms of Service, along with applicable UAE laws, including the UAE Civil Transactions Law (Federal Law No. 5 of 1985), UAE Consumer Protection Law (Federal Law No. 15 of 2020), and its Executive Regulations.
2. Definitions
"Services" means any home, office, or interior service we provide, including routine and premium service visits, specialty treatments, seasonal maintenance, and business service plans. "Custom Work" means bespoke joinery, cabinetry, furniture, or interior fit-out work designed, fabricated, and/or installed to your specification. "You" or "Customer" means the individual or business booking or commissioning Services or Custom Work from us.
3. Nature of Services
We provide residential and commercial services, including but not limited to standard and premium service visits, specialty treatments, move-in/move-out preparation, business service plans, and seasonal maintenance, as well as bespoke joinery, cabinetry, millwork, and interior fit-out work — from single custom pieces to full room or office installations — subject to availability and service area coverage across the UAE.
4. Quotations, Estimates & Site Surveys
Prices shown at the time of booking are estimates based on the service or project type and the information you provide. For Custom Work, an initial quotation is indicative only; we may require a paid or complimentary site survey to confirm exact measurements, structural conditions, and access before issuing a final quotation. The final price is confirmed by our team upon inspection or survey, based on actual size, condition, materials, and scope of work required.
5. Design Approval & Material Selection
For Custom Work, we will share design drawings, material samples, and/or finish options for your written or digital approval before fabrication begins. Fabrication will not commence until you have signed off on the design, dimensions, and material/finish selection. Any changes requested after sign-off may incur additional charges and extend the project timeline. Natural materials such as timber vary in grain, color, and texture — variation between a sample and the finished piece is expected and is not a defect.
6. Booking, Pricing & VAT
All prices are quoted in UAE Dirhams (AED) and are inclusive of applicable Value Added Tax (VAT) at the rate prescribed under UAE Federal Decree-Law No. 8 of 2017 on VAT, unless stated otherwise. Pricing for standard service visits is based on the property size and service selected at booking; pricing for Custom Work is based on the confirmed design, materials, and scope following survey and design approval.
7. Deposits & Progress Payments
Custom Work typically requires a non-refundable deposit before fabrication begins, to cover material procurement and workshop scheduling. For larger projects, we may agree progress payments tied to fabrication and installation milestones. Deposit and progress payment amounts will be set out in your project quotation or order confirmation.
8. Payment Terms
Payment for standard service visits is due upon completion of service unless a separate agreement is made for recurring or corporate accounts. Payment for Custom Work follows the deposit and progress-payment schedule agreed at order confirmation, with the balance due on completion or delivery. We accept credit/debit cards, cash, and approved online wallet payments. Late or disputed payments may be subject to collection procedures permitted under UAE commercial law.
9. Cancellations & Rescheduling
Standard service visits: cancellations or rescheduling requests made at least 24 hours before the scheduled appointment incur no fee; cancellations made within 24 hours, or failure to provide access to the property, may be subject to a cancellation fee to cover technician dispatch costs. Custom Work: orders may be cancelled without penalty before design approval; once fabrication has begun, the deposit becomes non-refundable to cover materials and workshop time already committed.
10. Delivery, Installation & Site Access
You are responsible for ensuring the delivery and installation site is clear, accessible, and ready to receive the work on the agreed date, including sufficient access for the size of the piece(s) being delivered. Delays caused by inaccessible sites, incomplete building works, or unavailable utilities (power, water) may result in rescheduling fees. We are not responsible for pre-existing conditions of walls, floors, or fixtures that are exposed or affected by ordinary installation work, unless caused by our negligence.
11. Customer Responsibilities
Customers must provide safe and reasonable access to the property, disclose any hazardous materials, fragile items, or special site conditions in advance, ensure valuables are secured, and provide accurate measurements and information where self-reported. Our technicians and installers reserve the right to decline unsafe work conditions.
12. Materials, Workmanship & Warranty
Custom Work is covered by a workmanship warranty against defects in materials or construction for a period specified in your order confirmation, typically 12 months from installation. This warranty does not cover normal wood movement (expansion, contraction, or minor surface checking due to humidity and temperature changes), fading or color change from sunlight exposure, damage from improper cleaning or maintenance, or wear and tear from normal use. Hardware and fittings supplied by third-party manufacturers carry their own manufacturer warranty, which we will pass through to you where applicable.
13. Service Guarantee & Complaints
If you are not satisfied with a completed service or Custom Work installation, you must notify us within 7 days so we can inspect and, where appropriate, offer a repeat visit, adjustment, or remedy, consistent with your rights under the UAE Consumer Protection Law. Complaints raised after this period may not be eligible for a free remedy, without prejudice to any rights that survive under the applicable workmanship warranty.
14. Limitation of Liability
Cubit Joinery is not liable for pre-existing damage, normal wear and tear, natural material variation, or damage to items not disclosed prior to service or installation. Our liability for proven direct damage caused by our staff is limited to the cost of repair or replacement, and, to the extent permitted under UAE Civil Transactions Law, we exclude liability for indirect or consequential losses.
15. Insurance
Where applicable, our operations are covered by liability insurance in accordance with UAE business licensing requirements. Claims for damage must be reported within 24 hours of service or installation completion and are subject to verification.
16. Health, Safety & Materials Used
We use products, tools, and materials in compliance with UAE health, safety, and municipality regulations, including guidelines issued by Dubai Municipality and Sharjah Municipality. Where possible, we use sustainably sourced timber and low-VOC finishes; eco-friendly products are used for general services where possible. Customers with allergies or sensitivities to specific finishes or materials should inform us in advance.
17. Intellectual Property in Custom Designs
Design concepts, drawings, and renderings we prepare for you remain our intellectual property unless otherwise agreed in writing, and are provided for the purpose of approving and fabricating your Custom Work only. We retain the right to photograph completed Custom Work for our portfolio and marketing, subject to Section 15 of our Privacy Policy.
18. Force Majeure
We are not liable for delays or failure to perform caused by circumstances beyond our reasonable control, including material supply shortages, extreme weather, government action, or other events of force majeure. We will notify you and take reasonable steps to minimize any resulting delay.
19. Employment & Labor Compliance
All Cubit Joinery staff, craftsmen, and installers are engaged in accordance with UAE Federal Decree-Law No. 33 of 2021 on the Regulation of Labor Relations, including applicable wage protection, working hour, and occupational health and safety requirements.
20. Governing Law & Dispute Resolution
These Terms are governed by the laws of the United Arab Emirates. Any dispute arising from these Terms, our Services, or Custom Work shall first be addressed through good-faith negotiation, and if unresolved, shall be subject to the exclusive jurisdiction of the competent courts of Dubai or Sharjah, as applicable, or referred to the relevant consumer protection authority.
21. Severability
If any provision of these Terms is found to be invalid or unenforceable under UAE law, that provision will be limited or eliminated to the minimum extent necessary, and the remaining provisions will continue in full force and effect.
22. Amendments
We may update these Terms of Service from time to time to reflect changes in our operations or UAE law. Continued use of our services after changes are posted constitutes acceptance of the revised Terms.
23. Contact Us
For questions regarding these Terms of Service, contact us at info@cubitjoinery.com, +971 54 553 2321, or Building 504, Khalid Bin Al Waleed Rd, Al Fahidi, Bur Dubai, UAE.


