Skip to main content
Guide

The bespoke joinery guide

Everything you need to know before commissioning bespoke joinery in the UAE: how the process works, how the finishes compare, what the numbers are and what clients say.

Our Process

How does a bespoke joinery project work?

Every Cubit Joinery project runs in three phases — Discover, Develop and Deliver — and nothing goes into production until you have approved the drawings. Fine craftsmanship starts with planning: one in-house team handles your project from the first brief to the final fitting, through these six stages:

  1. 01
    Brief and consultation

    Tell us about your space, requirements and budget, online or in person. We gather your preferences, inspiration, measurements and site information so the design starts from how you actually want to use the room.

  2. 02
    Design and quotation

    Our designers develop the design direction, then prepare the proposed scope, material and finish options and a quotation for you to review. You can refine the design before anything is confirmed.

  3. 03
    Site verification

    Once you confirm, we visit the site to check dimensions, wall and floor conditions and installation requirements, so the drawings are based on measured reality rather than assumptions.

  4. 04
    Shop drawings for approval

    We issue full technical drawings covering dimensions, materials, finishes and construction details. You review every elevation, and production starts only after your sign-off.

  5. 05
    Fabrication and finishing

    Materials are sourced and every piece is made and finished in our Dubai workshop. Each component is checked against the approved drawings before it leaves for site.

  6. 06
    Installation

    Our own installation team fits everything on site to the approved specification, then walks through the finished work with you. The work is never subcontracted, so the people who built it also install it.

See the full process →
In Numbers

What does working with Cubit Joinery look like in numbers?

A Cubit Joinery project follows 6 stages in 3 phases, nothing is produced before you approve the drawings, and completed work carries a workmanship warranty of typically 12 months from installation. These figures come straight from our process and our written terms, so you know what to expect before you commit.

6
stages from brief to installation, run by one in-house team
3
phases — Discover, Develop and Deliver — with sign-off before production
12 months
typical workmanship warranty from the date of installation
+15%
indicative cost of lacquer over melamine; wood veneer is about +35%
7 days
to report an issue after installation so we can inspect and put it right

Source: Cubit Joinery process, terms of service and online cost estimator, reviewed October 2026.

Finishes

Melamine, lacquer or wood veneer: which finish should you choose?

Choose melamine for hard-wearing, budget-friendly surfaces, lacquer (paint) for seamless colour, and wood veneer for real timber grain. The finish also protects the board from moisture, oils and UV light, so match it to the room and to how much care you want to give it. Here is how the three most-requested finishes compare:

FinishBest forLookCareIndicative cost
MelamineUtility rooms, back-of-house cabinetry, rental propertiesSolid colours and printed woodgrainsScratch- and moisture-resistant; wipe cleanBaseline
Lacquer / PaintKitchens and bathrooms matched to a colour paletteSmooth, seamless colour with the grain hiddenEasy to clean; small chips can be touched upAbout 15% above melamine
Wood VeneerWardrobe walls, credenzas and feature panelsReal timber grain, matched across panelsSealed finish; avoid prolonged direct sun and standing waterAbout 35% above melamine

Cost differences are the indicative ones used in our online cost estimator; your quotation depends on the final design.

Estimate your project cost →
FAQ

Frequently asked questions about bespoke joinery

Most clients ask the same few questions before a bespoke joinery project starts: where we work, how to get started, how pricing is set and what they will see before anything is built. Short, direct answers to the most common questions are below, and the full FAQ page covers the rest in more detail.

What areas do you cover?

We take on high-end residential and commercial projects across Dubai, and we are expanding into Sharjah. Our workshop is in Dubai, so projects there benefit from the quickest site visits, delivery and installation. For villas, apartments, offices, hospitality fit-outs and retail spaces elsewhere in the UAE, contact us with your location and we will confirm whether we can take it on.

How do I get started on a project?

Use the Enquire Now button to tell us about your project and your preferred time for a consultation. We will follow up to discuss scope, budget and timeline, then arrange a site survey where needed. After that we prepare a design direction and an indicative quotation for you to review, with no obligation to proceed. Sharing rough dimensions, photos or inspiration images up front speeds this up.

How does pricing work for custom joinery?

Every project is individually quoted, because the price depends on size, materials, finishes, hardware and installation conditions. An initial quotation is indicative; the final price is confirmed once we have surveyed the site and you have approved the design, materials and finishes. Choosing melamine, lacquer or wood veneer has the biggest effect on cost, and our online cost estimator gives a quick starting figure.

Will I see drawings before anything is built?

Yes. We issue comprehensive technical and shop drawings for your approval — covering dimensions, materials, finishes and construction details — before fabrication begins. You can review every elevation and request changes on paper, where they cost nothing. Production starts only after you have signed off, so what we build matches exactly what you approved and nothing comes as a surprise on site.

What finishes and materials can you work with?

We work with painted and lacquer finishes, natural and engineered wood veneers, laminates, melamine and other customised finishes to suit your design. Melamine is the hard-wearing, budget-friendly option, lacquer gives seamless colour, and veneer shows real timber grain. We will recommend the right board and finish for each room, based on moisture, sunlight and how much care you want to give it.

See all FAQs →
CUBIT